Pages

Monday, June 23, 2025

Big & Little Brother Blankets

 This is a project I've had in mind for my grandsons. The "big" brother is 3 years old and the little brother is 1 month old. I doubt either one will actually appreciate the gesture, but a handwoven gift from their grandmother is something I want to do! And with the Glimakra set up with a new treadle tie-up system, I'm anxious to see how that goes.  

I've done my yarn calculations a bit backwards. Rather than start with a finished size, I'm starting with an on-loom size. I have an idea of the draw-in and shrinkages, and the final size really isn't technical; in the ball park baby blanket size will do.

Warp
  • on-loom width: 40 inches
  • sett: 8 e.p.i.
  • on-loom length: 40 inches
  • crochet edges so no fringe: 3-4 inches between blankets
  • loom waste: 28 inches (I'm never sure about this with the Glimakra)
  • Total warp yardage: 2960 yards
Weft
  • length for each blanket will be same as width, 40 inches
  • on-loom width 40 inches x 8 p.p.i. = 320 inches for 1 inch of fabric
  • on-loom project length: 80 inches
  • 320 x 80 = 25,600 inches = 712 yards
Total yarn for project (warp + weft) = 3672 yards

Not included in the above yardage is the crochet edging. I will edge each blanket in a different color, so I'll wait on that.

I want to use Hobby Lobby Baby Bee Sweet Delight because it's cuddly soft and washable. And this week it's on sale for 30% off, so now's the time to buy. Hopefully, I can find enough skeins to pull it off.

© 2025 by Leigh at Leigh's Fiber Journal

Related post

Sunday, June 08, 2025

Treadle Tie-Up From the Top: Installing the Texsolv Cords

8 bunches of 10 cords each

This will be the last time I will have to get down on the floor and hunch over to thread the treadles and lamms! Once I'm done, the cords will be a permanent fixture and easy to arrange from the top on a comfortable seat. No more backache!

Each cord is threaded through the bottom of each treadle hole, where the pony bead secures it.

up through the lower lamm holes, 

then up through the upper lamm holes, and knotted at the end so they don't slip back down. 

Here's what it looks like with all the cords in place.


Next, I need a warp on the loom to try out my new tie-up method. I have a project in mind, but harvest and canning season is heavy upon us. Warping the loom will have to wait until I have some free time.